Quantcast

Interbike 2006:

Hope USA

Hope continues to make some of the best brakes out there for every mountain bike application. All their products come in a variety of customizible colors (such as chaning the colors of the piston caps).We’ve had some stuff on these 2007 Hope’s already but if you do a search on our main page you can see our hope coverage of the Moto FR.

In 2006 Hope migrated to phenolic pistons. I won’t diverge too much but phenolic pistons conducts less heat than stainless so less heat from the pads gets to the fluid as well as a few other benefits. See www.hopetech.com for more information.

Mono 6
 Hope Moto FR Levers

  • The body of master cylinder is in the shape of a delta for increased rigidity. There is no inflection of the master cylinder even during emergency braking. The adjustment is done with the same Allen key used for the adjustment of the distance of the lever. There are two lever shapes, standard or two fingers.

Patriot Colored
 Hope Hubs

Vented Rotor
 Vented Rotor

Moto FR
  • Moto FR offers a 25% increase in power compared to the MonoM4 or Mono6 with the same disc diameter but remains progressive
 Mud cutting rotor designincreased air is pushed into the caliper to help cool it as well

Mud cutting rotor design
 Hope stem

  • Available in oversized


Hope stem
  • Available in standard sizing

12 Responses to “Hope USA”

  1. koen Says:
    October 2nd, 2006 at 3:31 am

    Where’s the info?

  2. sicklines Says:
    October 2nd, 2006 at 10:11 am

    its comming! there’s alot more we’re still updating

  3. Chance Says:
    October 3rd, 2006 at 10:15 pm

    Wheres the prices?

  4. sicklines Says:
    October 3rd, 2006 at 10:59 pm

    what is it you want a price on?

  5. ilikemybike Says:
    October 4th, 2006 at 1:12 am

    Is Hope gonna make some Moto M4’s !?!?

  6. sicklines Says:
    October 4th, 2006 at 8:57 am

    Yea they are. Every single hope piece isn’t shown above just their new stuff mostly.

  7. Chance Says:
    October 6th, 2006 at 2:59 pm

    i want to know the prices on the Moto FR’s

  8. ilikemybike Says:
    October 23rd, 2006 at 11:08 pm

    $315 for Moto FR’s chance

  9. sicklines Says:
    October 31st, 2006 at 1:03 pm

    You can also contact HopeUSA for pricing/availability.

  10. mato mina Says:
    November 20th, 2006 at 4:44 pm

    as i see it, Hope has two logos. Which one will be used for 2007? Are they going to use both?

  11. jbear Says:
    May 8th, 2007 at 9:22 pm

    Moto FR (160mm rotors, front and back) weight?

  12. jesterben Says:
    May 27th, 2007 at 12:40 pm

    there isnt a 160mm version of the moto FR
    they only make a 203mm rotor for it at the moment.

Leave a Reply