SRAM had all of their products out for show at Interbike. They had working models of almost all their gear. It was nice for each of their brake kits to be out on display. The Code’s were even laid out with a cut away section of the caliper to see the inner-workings.
 |
 |
|
Code brake packaging
|
Code with cut-away
- Intended use: Downhill, Freeride
- Four Piston
- Center mount Pad Contact-Point adjustment knob
- 3 cartridge bearing lever pivot
- 2 piece lever with cam breakaway
- Up-front acces to reach adjustment
- Rotor sizes: 185mm, 203mm
- Weight: 561g(185mm front)Â / 597g (203mm front)
|
 |
 |
|
Juicy Ultimate
- Intended use: Light weight XC
- Magnesium body
- Forged monoblok caliper body
- Carbon fiber lever blade
- Pad contact-point adjustment and Tri-align caliper positioning system
- Matchmaker compatible
- Rotor sizes: 160, 185mm (front) 140mm (rear)
- Weight: 345g (front post mount 160mm)
|
Juicy Carbon
- Intended use: XC, All-mountain, Freeride, Downhill
- Carbon lever and reservoir cover
- Tri-align caliper positioning system
- Ti hardware
- Stainless steel banjo
- Matchmaker compatible
- Rotor sizes: 160, 185, 203mm
- Weight: 411g
|
 |
 |
|
Juicy 5
- Intended use: XC, All mountain
- Tri-align caliper positioning system
- Wonder clamp
- Rotor sizes: 160, 185, 203mm
- Weight: 428g
|
Juicy 7
- Intended use: XC, All mountain
- Pad contact-point adjustment
- Tri-align caliper positioning system
- Matchmaker compatible
- Rotor sizes: 160, 185, 203mm
- Weight: 420g
|
 |
 |
|
Juicy Ultimate
|
Juicy Carbon
|
 |
 |
|
Matchmaker rear view of Juicy Ultimate
|
Juicy Ultimate
|
Leave a Reply
October 4th, 2006 at 2:32 pm
hey, im wanderig whats better avid codes or hope mono6? cuz i dont know which one would be worth the money sice there both expensive and cost around the same.
thanks
October 4th, 2006 at 2:45 pm
I’d go with the codes if those were the two brakes you were trying to choose between.
October 5th, 2006 at 10:29 am
ok, do you know when they will be out? and for how much do you think they will cost? im guessing 700 for front and back.
thanks
October 5th, 2006 at 12:25 pm
you’re looking at 230 each end.
http://www.universalcycles.com/shopping/product_details.php?id=13002&category=
October 5th, 2006 at 2:14 pm
canadian?
October 5th, 2006 at 2:15 pm
US$